Carburetor kits are available in two styles. One kit includes 2 Plugs and 2 Sockets and the other includes 2 Plugs and 2 Washers. (Washers are aluminum)
Every Jiffy-tite Quick Connect Fluid Fitting provides minimal flow restriction for virtually any fuel, water or oil system on the market.
|
P/N | Thread Description | AN | Typical Carburetor Application* | | 200C1 | 7/8"- 20 UNEF Carb Kit, 2 Plugs, 2 Sockets | 6 | Holley® Dominator,
Holley® Center Pivot |
| 220C1 | 7/8" - 20 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 6 | Holley® Dominator,
Holley® Center Pivot |
| 200C4 | 9/16" - 24 UNEF Carb Kit, 2 Plugs, 2 Sockets | 6 | Holley® Single Feed, Demon™, King Demon™ |
| 220C4 | 9/16" - 24 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 6 | Holley® Single Feed, Demon™, King Demon™ |
| 200C7 | 5/8" - 20 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 6 | Carter® Two and Four Barrels |
| 220C7 | 5/8" - 20 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 6 | Carter® Two and Four Barrels |
| 300C1 | 7/8" - 20 UNEF Carb Kit, 2 Plugs, 2 Sockets | 8 | Holley® Dominator,
Holley® Center Pivot |
| 320C1 | 7/8" - 20 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 8 | Holley® Dominator,
Holley® Center Pivot |
| 300C4 | 9/16"- 24 UNEF Carb Kit, 2 Plugs, 2 Sockets | 8 | Holley® Single Feed, Demon™, King Demon™ |
| 320C4 | 9/16"- 24 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 8 | Holley® Single Feed, Demon™, King Demon™ |
| 300C7 | 5/8"- 20 UNEF Carb Kit, 2 Plugs, 2 Sockets | 8 | Carter® Two and Four Barrels |
| 320C7 | 5/8"- 20 UNEF Carb Plug, Includes 2 Plugs & 2 Washers | 8 | Carter® Two and Four Barrels |
Note: Above p/n's are also available with Buna N (Nitrile) seals. Aluminum washers are included. All kits come standard valved.
* This is not exclusive to brands listed above, refer to your carburetor manufacturer for accurate thread sizes.
Holley® is a registered trademark of Holley Performance Products, Inc.
Demon™ is a registered trademark of Barry Grant, Inc.
Carter® is a registered trademark of Federal Mogul Corp.
